Hyperlite Mountain Gear Porter 3400

The Hyperlite Mountain Gear Porter 3400 is a 55 liter weatherproof pack that weighs in around two pounds. At this point, I’ve had the pack for almost two years and in that time I’ve learned a fair amount about the Porter’s performance and build quality. I’ve taken it on day hikes, climbs, and backpacking trips throughout Colorado as well as on a three week trip through England and Kenya. This pack has seen both urban and wild environments. While it excels in both, it is meant for the backcountry.
The inside.

 

DSC01022
Interior zippered pocket.

This pack is basically a giant tube. With this design, you’re not limited by different storage areas and it really allows you to customize your weight distribution and overall packing preferences. The only compartment on the inside is a small zippered pocket, which is perfect for a few maps, a compass, and maybe some bars. It’s sized well, not too small that it’s pointless, but not too big that it gets in the way. I prefer to leave it empty or fill it and use it as a divider when packing. The zipper doesn’t unzip on its own and, being made from the same material as the rest of the pack, it performs well with keeping contents dry on the inside. If you stuff a wet jacket in there and have a phone inside the pocket, there’s no need to worry about damaging the phone. This pocket isn’t seam sealed, but it’ll still do the job with wet contents.

 

DSC01024
Removable aluminum stays.

Underneath the pocket is the frame. It’s made of foam, which is about a quarter inch thick (don’t quote me on that), and two aluminum stays. The cool thing about this is that the stays are removable and held in by simple velcro tabs. I like to leave mine in because I like the support and, to me, the weight saved by removing them isn’t enough to compromise on comfort. But if you’re someone who’s counting grams or if you need to make a splint, they come out easily. They are curved slightly, so if you do completely remove them and they don’t slide in effortlessly, that’s most likely why. The stays aren’t too thick, either, so you won’t feel them when hiking. The stays also don’t interfere with packing.

 

DSC01026
Interior seam-taping.

This pack is also seam-taped. It’s basically a dry bag with suspension. The seams on the sides, the logo, and the daisy chains are all taped and the construction has held up. A few months ago I used this pack in Rocky Mountain National Park during a downpour that lasted about five hours and at the end of it, the contents of my pack were totally dry. I wouldn’t recommend submersing this pack, but it can definitely withstand nasty, wet storms. It’ll keep dry in melting snow as well. Anyway, back to the tape. A little bit of dirt will accumulate on the edges and they will peel ever-so-slightly over time, but that doesn’t compromise the weather-resistance, it’s just aesthetic.

 

DSC01028
Velcro closure.

At the top of the bag is the Velcro closure. Lots of times Velcro starts to fray after extended use, but this ins’t one of those cases. This stuff is good. The stitching is solid and the hooks and loops stick together really well. Unless you thrash it open, it’s going to stay shut. And with just a few rolls, water won’t be getting in. Pet hair will get caught in the fibers and sometimes the “Made in Maine” tag will get in the way, but it’s such a small section that it hardly affects the pack’s closure.

 

DSC01029
Open space beyond the closure.

The Velcro doesn’t extend across the full length of the opening. This is actually useful because it seems to allow you to squeeze all the air out of the pack to get a less inflatable-feel.

 

IMG_4843
Hyperlite Mountain Gear Porter 3400 in Colorado’s San Juans.

The outside.

 

DSC01055
The pack filled completely next to a Thermarest Z-Lite Sol for size comparison.

There are two different ways this pack can be closed. I do both, depending on what I’m doing and carrying. The first way really compresses and streamlines the pack; it is the way HMG advertises it. The Porter has buckles on each side that connect to the buckles on the opening of the pack; once these are fastened, there is a final yoke closure that goes from the top of your shoulders to the front of the pack.

 

DSC01046
The Hyperlite Mountain Gear Porter 3400 with a Mammut SuperDry 8.3mm glacier line and Black Diamond Vector helmet attached externally.

This is really handy if you’re carrying something on top, like a rope. It’s surprisingly secure. I like to put my helmet through the yoke strap. Near the handle, the yoke strap has another buckle; it makes getting into the pack easier without undo-ing the whole system.

 

 

DSC01057
The pack compressed next to a Thermarest Z-Lite Sol for size comparison.

The second way is how you close a dry bag, and mimics the Arc’teryx Naos series from a few years ago. I prefer closing the pack this way most of the time. For me, accessing the inside is easier.

 

DSC01065
MSR Revo Ascent snowshoes attach to the sides of the pack easily with the compression straps.

The compression straps are multi-use. You can fasten snowshoes, ice tools, sleeping pads, and so much more in addition to compressing the pack. They’ve never loosened on me, the stitching is really tight, and the reinforcement points are solid, so you can put that extra attachment weight onto them without worrying. This is also a good time for me to commend the buckles. These are easy to open with minimal pressure, wet hands, and even with gloves and cold fingers. Combined with the simple closure, everything is very user-friendly for when your dexterity is limited.

 

IMG_4909
The compressed Porter in Colorado’s Sawatch Range.

Some might find the webbing excessive; I don’t. It’s handy when I need that extra length to pull on, weighs almost nothing, and makes me look pretty majestic in the wind. If I ever decide to shorten the straps, I can always cut them and burn the ends.

 

DSC01064
The compression straps and daisychain-spectra combination make this pack incredibly versatile. In this picture, I’ve attached a pair of Petzl Quarks and Black Diamond Cyborg crampons.

The daisy chain is on both sides of the pack, extending from the bottom to about half way up, as well as on 3/4 of the front of the pack. This feature really boosts the pack’s versatility. I put some spectra on the front for when I want to stuff something on the outside or don’t want to stick my crampons inside my pack. It’s helpful with ice tools, too. Spectra doesn’t come with the pack and is like an extra 12ish bucks if you order it from HMG. It was worth it for me and you never know when you’re going to need the extra line. I purchased 50′ and after looping this through the daisy chain, still had 24′ left. HMG also makes accessories you can affix to the pack like mesh sacks and pockets. This does the job for me, but it’s good that HMG offers those alternatives. If you really want some external pockets, definitely checkout their Southwest, Windrider, and Ice Pack models—they may be a better fit for you, in comparison to the stripped-down Porter.

 

IMG_4228
The Hyperlite Mountain Gear Porter 3400 at Kitchwa Tembo Airstrip outside of Narok, Kenya.

The suspension.

 

DSC01038
For how thin the handle is, it holds the weight of the pack very well. Here, on the right, you can also see the buckle mentioned earlier on the yoke strap.

At the top of the suspension is a webbing handle. It’s great when I need to throw this thing into a truck or onto a carousel or something. Below the handle is the foam padding I was talking about earlier. You have to be conscious of your packing. Like if you put a fluke or something that juts out up against this, you’ll be uncomfortable; it won’t be miserable, just not a 10/10 on comfort, more like a 4. It’s kind of like sleeping on a pointy rock. However, for what it is, it’s comfortable and even with minimal effort in packing, it will feel fine as long as you pack softer or flatter items against the frame. When I pack my folded Big Agnes Q-Core SL against the frame, it feels like a dream. Below the padding, there is some lumbar support with mesh over foam.

 

DSC01037
These pockets are spacious, but if they are filled completely or tightly near the apex of the zipper curve, they can be difficult to open. I can easily fit some bandaids, a SPOT, a personal towel, and lip balm in one pocket. For size, you can fit an iPhone 6S, but nothing larger.

Here is the hip belt. For some, this may be a downside of the pack because it’s not as customizable as some other packs out there. You don’t really have the adjustment features here that you have on some Osprey and Gregory packs. HMG doesn’t offer that, at least not at this point. I haven’t had any issues with this at all, though. For how simple this suspension system is, I’m impressed at how well it keeps the weight off my shoulders when fit correctly. I ordered mine with the hip belt pockets, their volume is weird, but you can still fit a decent amount of stuff in there.  The zippers are fairly water-resistant, but they’re finicky with closing all the way, staying completely shut when the pockets are full, and zipping and unzipping over the curve. Even then, I’ve never had water leak into them. The buckle is very secure and easy to fit, and just like the others, it’s super easy to buckle and unbuckle even with minimal dexterity.

 

DSC01035

The straps are made of the same materials as the lower suspension, there’s not as much padding and they are a little narrow compared to some other straps out there, but they don’t really dig into your shoulders as much as you may think. You can’t customize the fit up top, but you can easily do so on the bottom. The sternum strap is good at bringing everything together and you can move it up and down the anchors. The whistle is loud, too. If you use it, you will be heard, even with harsh gusts.
Biggest issue with the suspension of this pack comes when there’s more than 30-35 pounds. HMG advertises that this model has a carrying capacity between 25-40 pounds. I’ve found that anything really over 32 pounds, you’re going to start feeling it on your shoulders more, even with proper fitting. Mostly because these straps are narrow and I don’t think this pack is really built for that. If you keep it under 30 pounds, you’ll definitely be fine. However, if you are considering putting that weight in there, it can hold it, just not as comfortably as it would with less. You may want to consider the 4400 model for heavier loads.

 

DSC01043

So, in this picture, I’m pulling the strap from the body as hard as I can to expose the stitching. I did this to show that this pack is physically capable of supporting weight and the carrying capacity point I brought up is just a comfort issue. Who knows, maybe I’m just a wimp.

I’m 5’10, 155lbs. with an average build. HMG’s size medium fits me perfectly. It wobbles a little up top when completely full, but it fits to my back really well and does a fantastic job of keep all the weight off my shoulders. It sits just above my iliac crest. There’s definitely no pinching on my shoulders, arms, or hips. If you’re unsure of size, HMG is there to help.

The Porter is really great for weeklong trips, but also excels when compressed as a day pack for short hikes, climbs, peak bagging, all that. Honestly, if you plan well, this pack is more than you could ever need for a thru-hike.

 

DSC01039
I love how this pack shows the colors of where it’s been. Many of HMG’s packs come in either white (above) or black.

The fabric.
Every single time I take this out and tell someone about it, they always say “it’s so thin, how do you not tear it?” and that’s a good question because I don’t know. I’m not careful with it. Like at all. I think HMG’s got some kind of magic formula or something. This material is very, very, very durable. I’ve slid it down scree slopes, it’s been rubbed against granite, fallen out of a moving truck, glissaded down snow fields. It’s bomber, really. I wouldn’t call it waterproof because it’s hard to put that label on things, but I’ve had it in a few downpours and set it in a few puddles and everything inside kept dry. If anything would leak through, it would be the seams, not the fabric itself. However, that’s never something I’ve had to really worry about. Nor ever will. While everyone else is fidgeting around with their rain covers, I’ve got a cheeky grin on my face.

So, the industry is in a transition phase with the name “Cuben Fiber.” When I purchased this pack in 2014, it was advertised as a nylon-cuben fiber blend. To keep things short, cuben fiber is transitioning to the name Dyneema Composite Fabric to give more credit to the manufacturers of the material. So look out for that in the future. Same material, different name. If you want to learn more about this, here’s a link.

Information about the “cuben fiber” name change

Also, as of February 1, 2016, HMG has also changed its logo from the images above to the image below. It’s just something to be aware of if you are purchasing these items used.

 

DSC01117.jpg
HMG’s new logo on the small stuff sack pillow.

Most of the pack is made of a 50D fabric. The bottom and about 1/5 of the way up the front and sides is a 150D fabric. The bottom is a lot thicker and you can definitely feel it and hear it. Oh that’s another thing, when it gets cold, like 10°F and below, this stuff gets really crinkly and noticeably more stiff. It’s not hard to work with, but there is a little bit of a change in feel when the temperature drops. When you first get it, you’ll start to get crinkles. They’re normal and the fabric isn’t any weaker because of them. My pack also has a ton of scratches and none of them have gotten through. I’m talking stepping on it with crampons, poking it with ice tools, none of it has torn. And if it did, it’s an easy repair with cuben tape. HMG sells this and so does ZPacks. HMG’s is thicker, but you get more bang for your buck with ZPacks’ tape. I’ve used both and they do the job. This is the really important part. I understand that the durability/puncture/tearing concern is one of the main reasons people are hesitant to purchase these products. Check out the video at the end. In it, I take my Black Diamond Cyborg crampons to the pack. It’s a little exaggerated, but the possibility of stepping on your pack with crampons or encountering sharp objects with it is a realistic one. It’s 6:40 into the video.

 

IMG_4865
The Hyperlite Mountain Gear Porter 3400 in Colorado’s San Juans.

Overall, this is a great pack. It’s really durable, light, adaptable, and weatherproof. It’s also made in Maine by a company with outstanding customer service. They’re one of the few companies out there that has actually stayed true their mission. This pack is dynamic. It’s great for day hikes and climbs as well as week long trips and traveling through different cities and countries. Only thing I can bring up in this regard is that it did raise a few security flags in London. Its “appearance” was considered suspicious. The dude was rude and went out of his way to make a deal about it. You should be fine traveling internationally.

It’s so simple, yet exceptionally designed and built. I recommend this for anyone going ultralight or lightweight that wants a do-it-all weatherproof pack that will last them. This pack isn’t the most comfortable or the most customizable, but I wouldn’t dissuade you from purchasing it on that alone. It takes on the colors of where you take it over time, but that’s going to happen regardless. Using this pack made me think more critically about how and what I pack and has ultimately made me transition from a “bring everything” mindset to one more in line with bringing only what I need. I can say that if it weren’t for this pack, I might not have enjoyed some trips as much as I would have. I might not have had the motivation to go where I’ve gone had my pack been heavier. Do I recommend this? Hell yeah. There’s a good chance this will be the only pack I use for the next few years. That’s how much I trust it.
Don’t just take my word for it. Look into what other people are saying about the Porter before you make your purchase. Here’s a link that will take you to HMG’s website for all of the specs and a few reviews.

Hyperlite Mountain Gear Packs

They’re a strong company, check them out. Look forward to more Hyperlite Mountain Gear tellabouts as well as some other products I’ve beaten up. Thanks for reading and I hope this was of some use to you!

Here’s the video I mentioned earlier. Watch me tell you about the Porter while trying my hardest not to say “um.”

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s